• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

700cc Bosch part #

90volvo

Active member
Joined
May 27, 2017
Location
Eldorado Springs Mo.
Yes I?ve search until I?ve passed out. Lol. Just not finding anything.
High imp. Redblock b230f +T. Running stock rail. I have Volvo 850t injectors installed at the moment.
Found couple sources for injectors but they want part numbers. Thanks
 
Did you check http://users.erols.com/srweiss/tableifc.htm#BOSCH ?

At a quick glance I saw the 0-280-150-845 which are rated at 677cc but are low-Z.

I love that chart.

https://www.fiveomotorsport.com/227u-bosch-ev14-us-domestic-long-fit-uscar/

Bosch data with part numbers and flow
http://www.bosch-motorsport.de/cont...Data sheet_67797771_Injection_Valve_EV_14.pdf

If you just have to have bosch DW sells EV14's
https://www.deatschwerks.com/fuel-injectors

Also here
https://www.summitracing.com/search...ersal-fuel-injectors/part-type/fuel-injectors

If willing to use other brands
https://www.racetronix.biz/storeitems.asp?cc=fuelinj-09

These guys have a faily good rep
http://injectordynamics.com/injectors/

Also these guys are local to myself and I have thier 1600cc injectors in my car
http://www.ausinjector.com/750-cc-min-71-lbs-hr/

You can also run 62-65lb/hr injectors with a 4bar FPR and get the 70lb/hr
https://www.holley.com/products/fuel_systems/fuel_injection/injectors/parts/74620L

Remember you want a 60mm long injector with 14mm orings.

Lots of options.
 
I love that chart.

https://www.fiveomotorsport.com/227u-bosch-ev14-us-domestic-long-fit-uscar/

Bosch data with part numbers and flow
http://www.bosch-motorsport.de/cont...Data sheet_67797771_Injection_Valve_EV_14.pdf

If you just have to have bosch DW sells EV14's
https://www.deatschwerks.com/fuel-injectors

Also here
https://www.summitracing.com/search...ersal-fuel-injectors/part-type/fuel-injectors

If willing to use other brands
https://www.racetronix.biz/storeitems.asp?cc=fuelinj-09

These guys have a faily good rep
http://injectordynamics.com/injectors/

Also these guys are local to myself and I have thier 1600cc injectors in my car
http://www.ausinjector.com/750-cc-min-71-lbs-hr/

You can also run 62-65lb/hr injectors with a 4bar FPR and get the 70lb/hr
https://www.holley.com/products/fuel_systems/fuel_injection/injectors/parts/74620L

Remember you want a 60mm long injector with 14mm orings.

Lots of options.

Thanks for the info. Will be talking to you soon. Sent you a pm.
 
Back
Top