Search results

I have another problem with the new 240. Its a Aus 83, auto kjet. Has egr. Okay here's the story, I replaced the timing belt and the distrib pulley was off the mark one tooth so I set it right and put the new belt on. Of course it ran like **** so I reset the timing to ~10 deg BTDC, before I...

My dash lights are out. I bypassed the umm.. resomethingstat. You know what I mean. The power is going through it but the dash lights aren't working... I dont understand.. Suggestions? EDIT// Sorry this is on a 240

Hi there, I need help with a little problem. I don't really know what the problem is, so I thought I'd ask the people who know best! I bought another 240 the other day and it haden't been started in a few years, and I have it on a good basis that it was running fine beforehand. Ran into a few...

Anyone using these? Alright quality. Both of mine were fugged so I threw them out. Ebay

so i was perusing a car sales site for 240s. and i realised the odd combinations of coloured trim on the dash depending on year and model (ie. gl and gle). so i decided to post my findings. obviously, i may have missed something. so please don't hesitate to correct me. oh, and these are all...

A nice video showing photos of a 360 race car in the UK I assume. Is there anything like majorly wrong with building a header like this guy has used? I mean I know its not tuned length what so ever and its poorly designed, but what difference on paper would that make to this guy? Would he really...

This belongs to a guy from Sydney. Don't know if anyone on the forum knows him but I thought I'd post the pics.. Unfortunately the car was stolen in Dec last year, not sure if it was recovered. Was a beast by the looks. 144 Volvo sedan. Flat grey paint 1JZ-GTE engine and R154 5-speed. Hilux LSD...

I broke the sensor on the side of my getrag trying to get it out. Is this needed for the conversion? What kind of sensor is it? I can get a new one in there, just need to know so that I can bung the hole or get a new one from BMW. Thanks :)

Heeey everyone, The 240 isnt at home at the moment, can anyone give me the hub to hub measure (track?) of the rear end? Just measuring up some suitable replacements Thanks :)

Weeeelll I did a search and was doing a bit of reading and am a tad confused, well not really but I need things cleared up. I was planning on just ordering a clutch kit for an e30 M3 or just a bmw 228mm from a getrag equip car, because I can get them cheap through work. I know the input shaft...

Does anyone have the diagram of the 240 ignition? We are trying to start a 240 in the yard, the last remaining key was snapped off in the boot lock. Its an early one too. Or if someone could just let me know how to get it started and take the steering wheel lock off. Thanks a bunch :) Christian

I have been cruising wheel sites lately and looking at my options, and so I have a few questions. The first one is where is the best place to get 'proper' wheel spacers for FWD offset wheels? I was looking at the ebay ones and they are all for v70 850 etc hubs. Do these have the same centre...

Does anyone have the part number for first oversize Mahle forged pistons for a b23et? Just interested in pricing them, hard to find a part no. though. Thanks in advance guys

I am a bit of a noob with the MS unit. I have done some reading over the last few weeks and am confident on most of the install and tuning aspects but I need to know something. So I have a b23e that is apart atm receiving all the usual +T parts running with a rebuilt hy35. I have only 2...

Hey all I reversed my 81 auto 244 last week to move it into a more suitable location for it to live for a while for the engine to come out and there was a strange grinding noise under the transmission tunnel... and its quite loud in there because there is no carpet or sound deadening. It only...

So there is this turbo on ebay that I have been eyeing up that this guy down South makes up and they sell for around 400-500 new. Well they are built from new parts. My question is.. is this turbo a similar spec to a hx35 holset turbo or something larger? I really want what is being seen with...

Hello all, My name is cj I live in Australia, I am new to the forum, I thought i'd post up some info on my volvo project! My friends family have been volvo lovers forever, he has had a 242gt and currently has a 142. His father has a 120 wagon, **** 1800, mint 1800, 740 turbo, mint 144, 164 and...