JaimeMedina
Member
- Joined
- Aug 10, 2021
- Location
- Charlotte, NC
After a turn signal bulb replacement job went terribly wrong, I ended up stripping the wires that connect to the socket for my left turn signal. At first, the left turn signal didn't function on the dash, however now the right turn signal doesn't function anymore either, despite the wiring being fine on that side. I've been searching for a replacement socket connector, although I'm not entirely sure if that's what the part is even called.
https://imgur.com/ekzQ8jE
Here's the connector piece that plugs into the socket. The three wires that are supposed to plug into there got stripped out. The piece looks pretty icky to me so I think it would be best if I replaced it anyway.
https://imgur.com/CZLfvfn
These are the three wires that got pulled out.
https://imgur.com/ekzQ8jE
Here's the connector piece that plugs into the socket. The three wires that are supposed to plug into there got stripped out. The piece looks pretty icky to me so I think it would be best if I replaced it anyway.
https://imgur.com/CZLfvfn
These are the three wires that got pulled out.