Jack
junkman
- Joined
- Jul 7, 2011
- Location
- The Ass Cheek Of History
please forgive the obvious questions but I have way over complicated this and need some helpz
T5 I have for my 245 b230 block
looks like it is
1352-169 Ford 1986 1/2 Mustang/Capri 5.30 V8 WC V 3.15 3.35 1.93 1.29 1.00 0.68
The speedo cable gear housing is missing. The gear inside is YELLOW. I have 373 rear end
so what gear housing and gear do I need? links please
This is for a cable driven speedo
recommendations for bushing that goes here? brass or nylon? links please
bell housing adapter
I assume the notch goes here ? Should I use thread lock ? and what torque spec?
also I assume the 1/2 thread thats left from machining is ok to cut off
is there a gasket that goes between shifter and housing or just use rtv?
(pro 5.0 shifter was purchased separately used)
T5 I have for my 245 b230 block
looks like it is
1352-169 Ford 1986 1/2 Mustang/Capri 5.30 V8 WC V 3.15 3.35 1.93 1.29 1.00 0.68
The speedo cable gear housing is missing. The gear inside is YELLOW. I have 373 rear end
so what gear housing and gear do I need? links please
This is for a cable driven speedo
recommendations for bushing that goes here? brass or nylon? links please
bell housing adapter
I assume the notch goes here ? Should I use thread lock ? and what torque spec?
also I assume the 1/2 thread thats left from machining is ok to cut off
is there a gasket that goes between shifter and housing or just use rtv?
(pro 5.0 shifter was purchased separately used)
Last edited: